Slab leak water damage in Wisconsin Rapids involves a supply line that has failed in or under a concrete slab. The slab can be a garage, an addition, a slab-on-grade room or a basement floor with lines in it. Because the leak is out of sight, it can run for a long time and soak the subfloor, flooring and walls before anyone sees a sign.
A leak you can see under a sink is a different job, and it is on kitchen water damage or burst pipe water damage. The drying work that follows a slab leak is on the structural drying page, and a leak into a lower level is on basement water damage cleanup.
A slab leak is an emergency
A slab leak runs constantly, so the water bill and the moisture keep growing. Water that reaches flooring and walls from below can wick up a wall, and standing moisture under a slab can undermine a floor. Dispatch is open 24/7, including weekends.
If you suspect a slab leak
- Shut off the main water valve if you hear running water with all fixtures off.
- Stay off wet floors and keep away from any outlets in a damp room.
- Check the water meter. If it moves with everything off, a line is leaking.
- Call (715) 227-0967 and describe the signs.
Signs of a slab leak
Warm spots on the floor
A hot water line leaking beneath can warm a patch of the floor.
The sound of running water
A hiss or trickle when everything is off.
A rising water bill
A jump with no change in use.
Damp carpet, cracks or musty odor
Moisture pushing up through the floor.
A warm spot or a spinning meter?
Describe the signs to dispatch and learn the next step.
How a slab leak is found and dried
A leak detection specialist or plumber pinpoints the line with acoustic and thermal tools, and the line is repaired or rerouted. Restoration handles what the water did: moisture mapping of the flooring and walls, extraction where water has pooled, and drying of the materials that were soaked from below.
- 1
Confirm the leak
The meter test and detection tools find the line.
- 2
Stop the water
The line is repaired or rerouted by a plumber.
- 3
Map and dry
Moisture meters and thermal cameras guide the drying of floors and walls.
- 4
Repair
Flooring, baseboards and drywall are repaired after the structure is dry.
Concrete holds moisture and releases it slowly, so drying a slab takes patience. The crew places dehumidifiers and air movers and checks the slab and the flooring on each visit. If a floor covering was glued down, it may need to be lifted so the slab can dry.
Which floors are affected
| Floor covering | Effect of a slab leak | Usual outcome |
|---|---|---|
| Carpet and pad | Wicks moisture from below | Lifted and dried, or replaced |
| Glued hardwood | Cups and lifts | Often replaced |
| Tile | Grout and subfloor hold water | Lifted if loose, otherwise dried |
| Vinyl and laminate | Swells or lifts at the seams | Often replaced |
What affects the price of slab leak water damage
How long it leaked
Months of leakage cause more damage than a recent break.
Floor coverings
Glued-down floors are harder to dry and more likely to be replaced.
Slab drying time
Concrete dries slowly, which adds equipment days.
Plumbing repair
Rerouting or repairing the line is separate from restoration.
Call (715) 227-0967 to learn how the scope and price would be built for your floors.
Slab leaks and insurance
Coverage for the leak and the damage often depends on the cause and how long the leak ran. Policies can treat the cost of reaching the pipe differently from the water damage. Keep the plumber's report, the meter readings and photos, and call your agent early.
Slab leak questions
Do you handle slab leak emergencies at night or on weekends in Wisconsin Rapids?
Yes. Dispatch is answered 24 hours a day. Shut off the main valve if water is running, then call.
How do I know it is under the slab?
A moving meter with everything off, warm floor spots and the sound of running water point there. A specialist confirms it.
Does restoration find the leak?
A plumber or leak detection specialist finds and fixes the line. Restoration dries and repairs the damage.
Can the slab be dried?
Yes, with dehumidifiers and air movers, but it takes time, and the crew uses readings to know when it is done.
Is mold a concern?
It can be if moisture stays. Drying and ventilation lower the risk.
